Derby Regulator and Cut-out

Forum for all items pertaining specifically to Derby cars.
(Public visibility)
Post Reply
tonymce
Posts: 36
Joined: Wed Dec 12, 1984 12:00 am
Location: Western Cape, South Africa

Derby Regulator and Cut-out

Post by tonymce »

I have had the coils on my old regulator and cut-out rewound and wish to have the unit checked to confirm that it is set up correctly. I am having trouble finding anyone who feels competent to do this, including Classic Dynamo and Regulator Conversions. Can anyone help with recommending a company that could do this?
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Ribblesdale Autoelectrics, they advertise in "The Automobile". Old style, very good.
tonymce
Posts: 36
Joined: Wed Dec 12, 1984 12:00 am
Location: Western Cape, South Africa

Post by tonymce »

I am afraid that Ribblesdale Auto Electrics have not been able to refurbish my regulator and cut-out.

Might anyone know of another company that has experience of the Derby item or does anyone have any experience with modifying this to accommodate a modern regulator and cut-out in place of the original?
tonymce
Posts: 36
Joined: Wed Dec 12, 1984 12:00 am
Location: Western Cape, South Africa

Post by tonymce »

I am afraid that Ribblesdale Auto Electrics have not been able to refurbish my regulator and cut-out.

Might anyone know of another company that has experience of the Derby item or does anyone have any experience with modifying this to accommodate a modern regulator and cut-out in place of the original?
James Ashby
Posts: 7
Joined: Tue Oct 09, 2012 11:00 pm
Location: Kent, United Kingdom

Re: Derby Regulator and Cut-out

Post by James Ashby »

I don't know if you have now solved your problem, but these people seem to be working along the right lines, so may be worth contacting.

http://www.dynamoregulatorconversions.com/about-me.php

My 'other' hobby is vintage tractors, and the regulators and charging circuits can be a bit of a problem there, too, so I keep a 'list' of companies that may one day get me out of a hole.

Good luck
User avatar
Nicholas Simons
Posts: 230
Joined: Thu Aug 01, 2019 10:30 am
Location: Derbyshire, United Kingdom

Post by Nicholas Simons »

The cut-out assembly can be rebuilt by Armoto.
http://www.vehicle-electrical-rewinds.co.uk/
If your regulator is non-functional it can be replaced by the electronic one sold by the BDC, Derby Spares Scheme.
tonymce
Posts: 36
Joined: Wed Dec 12, 1984 12:00 am
Location: Western Cape, South Africa

Post by tonymce »

Thank you for your feedback regarding my Regulator/cut-out. I could not find anybody that could repair the original unit but did find a gentleman, Trevor Joyce, that rebuilt it (at a not insignificant cost) with the unit I subsequently found was the same as provided by the Club. This item can also be found at motor factors significantly cheaper if you wish to look for it. It does now work exceptionally well.
Post Reply