Having trouble with my Autovac and one of the points to be checked is 'Make sure the air hole in the Filler Cap is Clear'
Don't have a hole and it hasn't troubled the car to date but as my filler cap is fairly new wondered if it was an original drilling.
Nerdy question - size and position?
I think the Autovac problem is to do with leaving fuel in the tank over a long time (although I added that preserver stuff !)
Filler Caps
-
JohnWilliams6437
- Posts: 54
- Joined: Tue Jan 21, 2003 12:00 am
- Location: Derbyshire, United Kingdom
- Nicholas Simons
- Posts: 230
- Joined: Thu Aug 01, 2019 10:30 am
- Location: Derbyshire, United Kingdom
-
JohnWilliams6437
- Posts: 54
- Joined: Tue Jan 21, 2003 12:00 am
- Location: Derbyshire, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
Any leak on the supply side will cause problems, a poor soldered joint may well open and close with chassis flex. I have experience that problem.
I suspect Nicholas may be referring to the gasket between the tank and top of the unit which has the various valves and pipes attached.
Hopefully you are now all fixed.
As for a hole in the filler, the 3ltr style auto vac doesn't have a screw on filler, so I assume your car is a 4 1/2 I'm surprised that they would rely on a hole in the cap, but no reason why not!
I suspect Nicholas may be referring to the gasket between the tank and top of the unit which has the various valves and pipes attached.
Hopefully you are now all fixed.
As for a hole in the filler, the 3ltr style auto vac doesn't have a screw on filler, so I assume your car is a 4 1/2 I'm surprised that they would rely on a hole in the cap, but no reason why not!
- Nicholas Simons
- Posts: 230
- Joined: Thu Aug 01, 2019 10:30 am
- Location: Derbyshire, United Kingdom
Yes John, I was referring to the two large diameter cork gaskets that go between the cast metal top of the Autovac, the flange of the inner tank and the main tank.
The filler cap on my ( possibly original ) 3 litre petrol tank has no breather hole. The brass threaded spigot that is affixed to the tank has a narrow slot milled into the thread to provide the breather. Some confusion may exist when talking about filler caps, because I have seen some WOs with a side filler on the Autovac lower chamber.
The filler cap on my ( possibly original ) 3 litre petrol tank has no breather hole. The brass threaded spigot that is affixed to the tank has a narrow slot milled into the thread to provide the breather. Some confusion may exist when talking about filler caps, because I have seen some WOs with a side filler on the Autovac lower chamber.
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
JohnWilliams6437
- Posts: 54
- Joined: Tue Jan 21, 2003 12:00 am
- Location: Derbyshire, United Kingdom
-
Iain Warner
- Posts: 148
- Joined: Fri Apr 03, 1992 11:00 pm
- Location: Norfolk, United Kingdom

