Temperature Gauge not working

Forum for all items pertaining specifically to Derby cars.
(Public visibility)
Post Reply
Bass1st
Posts: 9
Joined: Fri Jun 14, 2024 8:38 am
Location: Leicestershire, United Kingdom

Temperature Gauge not working

Post by Bass1st »

1936 4 1/4 litre and the temperature gauge has suddenly stopped working. The connections at the engine and the gauge seem OK, but I am unsure of how it operates or what to specifically look for.

Car seems to run fine and there is water in the radiator at the expected level.

Any hints or tips on what to check?
User avatar
John Murch
Posts: 1586
Joined: Sat Jun 05, 1976 11:00 pm
Location: London, United Kingdom

Post by John Murch »

These gauges are usually filled with ether (or similar) tiny pin hole leaks can occur, while it is possible to do a diy repair, getting the ether, and refilling the bulb can be very difficult.
Donald Day repaired mine some years ago. Speedy Cables also used to repair them too.
https://www.speedycables.com/
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

The gauge and sensor are in one piece, as shown. The last one I had was rebuilt by Alpine Eagle, about £370.00.

The previous example was replaced with an electric sensor and gauge "painted" "B".

Image
Post Reply