Weight of 3ltr Radiator
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
Weight of 3ltr Radiator
Would anyone happen to know the weight of a dry 3ltr radiator?
I don’t want to surprise myself when I take it off!
I don’t want to surprise myself when I take it off!
-
Christopher Carnley
- Posts: 2753
- Joined: Fri Nov 16, 2007 12:00 am
- Location: Yorkshire, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
- Stephen Blakey
- Posts: 1348
- Joined: Thu Feb 02, 1995 12:00 am
- Location: Derbyshire, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Iain Warner
- Posts: 148
- Joined: Fri Apr 03, 1992 11:00 pm
- Location: Norfolk, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Iain Warner
- Posts: 148
- Joined: Fri Apr 03, 1992 11:00 pm
- Location: Norfolk, United Kingdom
John, It just seemed the easy thing to do. I hinge the disconnected radiator forward on the trunnions at the same time easing the pump from the housing and lifting off together with pump held on by bottom hose.
My rad of course is wider at the top but then does not have the later type header tank extending back. Also I suppose the weight will vary with how scaled up the core is.
My rad of course is wider at the top but then does not have the later type header tank extending back. Also I suppose the weight will vary with how scaled up the core is.
-
DavidThompson
- Posts: 139
- Joined: Thu Sep 10, 2015 11:00 pm
- Location: Hampshire, United Kingdom
I cut the hoses off before removing my radiator, as I intended replacing with new ones.
Without doubt putting it back on with the water pump attached made the job much easier.
You may find the inlet tube to the pump is corroded away, and if so an effective repair can be carried out using 26mm aluminium sleeve inside and 32mm tube bonded with JB Weld.
Let me know if you need some - I had to buy 2 metres to get the 2 inches I needed.
Without doubt putting it back on with the water pump attached made the job much easier.
You may find the inlet tube to the pump is corroded away, and if so an effective repair can be carried out using 26mm aluminium sleeve inside and 32mm tube bonded with JB Weld.
Let me know if you need some - I had to buy 2 metres to get the 2 inches I needed.
-
DavidSimpson5769
- Posts: 9
- Joined: Fri Mar 08, 2019 12:00 am
- Location: Kent, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom

