Driving dogs for my 4 1/4?

Forum for all items pertaining specifically to Derby cars.
(Public visibility)
Post Reply
Richardson Masten
Posts: 49
Joined: Thu Jan 01, 1970 12:00 am
Location: California, USA

Driving dogs for my 4 1/4?

Post by Richardson Masten »

Any thoughts as to where I can find replacement driving dogs for my 4 1/4? Mine are very "clonky."
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Try Fiennes Parts, or Steve Maggs at Maggs at Maggs Vintage.

I have had to renew worn hubs, and half shafts with new parts due to wear, the parts were never carburised in manufacture, or they would never have gone in.

I had a "bad" 3 1/2 litre from Mallorca 18 months ago, the axle was OK apart from the dogs, Steve sold me a plus 7 thou and a plus 10 thou, to de-clonk it.

This followed a 4 1/4 that had all of the 15 No crown wheel studs broken.

A bit of a mess.
Richardson Masten
Posts: 49
Joined: Thu Jan 01, 1970 12:00 am
Location: California, USA

Post by Richardson Masten »

Relative to the driving dogs, today I have the rear end off the ground and I have noted that most of the clunking noise comes from the off side. Any thoughts or recommendations?
Post Reply