Page 1 of 1
Derby Regulator and Cut-out
Posted: Fri May 03, 2019 7:05 am
by tonymce
I have had the coils on my old regulator and cut-out rewound and wish to have the unit checked to confirm that it is set up correctly. I am having trouble finding anyone who feels competent to do this, including Classic Dynamo and Regulator Conversions. Can anyone help with recommending a company that could do this?
Posted: Fri May 03, 2019 10:07 am
by Christopher Carnley
Ribblesdale Autoelectrics, they advertise in "The Automobile". Old style, very good.
Posted: Fri Jul 05, 2019 7:21 am
by tonymce
I am afraid that Ribblesdale Auto Electrics have not been able to refurbish my regulator and cut-out.
Might anyone know of another company that has experience of the Derby item or does anyone have any experience with modifying this to accommodate a modern regulator and cut-out in place of the original?
Posted: Fri Jul 05, 2019 7:22 am
by tonymce
I am afraid that Ribblesdale Auto Electrics have not been able to refurbish my regulator and cut-out.
Might anyone know of another company that has experience of the Derby item or does anyone have any experience with modifying this to accommodate a modern regulator and cut-out in place of the original?
Re: Derby Regulator and Cut-out
Posted: Sat Jan 30, 2021 5:37 pm
by James Ashby
I don't know if you have now solved your problem, but these people seem to be working along the right lines, so may be worth contacting.
http://www.dynamoregulatorconversions.com/about-me.php
My 'other' hobby is vintage tractors, and the regulators and charging circuits can be a bit of a problem there, too, so I keep a 'list' of companies that may one day get me out of a hole.
Good luck
Posted: Sun Jan 31, 2021 10:25 am
by Nicholas Simons
The cut-out assembly can be rebuilt by Armoto.
http://www.vehicle-electrical-rewinds.co.uk/
If your regulator is non-functional it can be replaced by the electronic one sold by the BDC, Derby Spares Scheme.
Posted: Mon Feb 01, 2021 7:14 am
by tonymce
Thank you for your feedback regarding my Regulator/cut-out. I could not find anybody that could repair the original unit but did find a gentleman, Trevor Joyce, that rebuilt it (at a not insignificant cost) with the unit I subsequently found was the same as provided by the Club. This item can also be found at motor factors significantly cheaper if you wish to look for it. It does now work exceptionally well.