Anyone have a supplier for the rebuild kits?
Also are the knurl caps vented or not?
I have a mix match set
On with hole the other without
Thanks in advance
Gtjoey13-4
S.U. Gasket kit and caps
-
GTJOEY1314
- Posts: 25
- Joined: Mon Oct 23, 2023 3:03 pm
- Location: New York, USA
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
https://sucarb.co.uk/carbspec/carburett ... als/id/506
Regarding the caps, the chamber does, I believe, require venting, some units rely on a hole in the cap, some have an internal vent. I'm told that its not a good idea to have both.
A trawl round on the website above should come up with diagrams to show where the internal vent is.
Regarding the caps, the chamber does, I believe, require venting, some units rely on a hole in the cap, some have an internal vent. I'm told that its not a good idea to have both.
A trawl round on the website above should come up with diagrams to show where the internal vent is.
-
GTJOEY1314
- Posts: 25
- Joined: Mon Oct 23, 2023 3:03 pm
- Location: New York, USA

