I noticed in an advert for a 4½ :
The car even retains its original leather trays between the chassis and the sump flange, which are almost always missing,
I'd never previously heard of such things. Were these fitted to all WO's or were they an extra, or is the quote not quite true?
John
Leather 'trays' (picture)
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Iain Warner
- Posts: 148
- Joined: Fri Apr 03, 1992 11:00 pm
- Location: Norfolk, United Kingdom
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Mark Hollis
- Posts: 162
- Joined: Mon Mar 01, 2010 6:23 pm
- Location: East Anglia
-
William Highley
- Posts: 59
- Joined: Mon May 04, 1981 11:00 pm
- Location: Yorkshire, United Kingdom
Dear Laurie and all,
I have taken a picture of the "leather trays" which I took off my 4½ litre many years ago. I must get around to putting them back on the car! If anyone would like a pattern please let me know. I suspect the holes that attach them to the sump flange and chassis may well be slightly different in every car. The leather is about ¼ inch thick.
Kind Regards,
William Highley

I have taken a picture of the "leather trays" which I took off my 4½ litre many years ago. I must get around to putting them back on the car! If anyone would like a pattern please let me know. I suspect the holes that attach them to the sump flange and chassis may well be slightly different in every car. The leather is about ¼ inch thick.
Kind Regards,
William Highley

-
Laurie Fox
-
William Highley
- Posts: 59
- Joined: Mon May 04, 1981 11:00 pm
- Location: Yorkshire, United Kingdom
Laurie,
Yes, I have always assumed that they are there to stop muck etc. being thrown up into the engine area. Likewise they collect oil etc. from any small leaks from the engine which flies and dirt get stuck to. That may have been why I left them off!
Whether they were fitted to all cars I don't know but if you have holes on the outer edge of the sump flange and some small holes in the chassis your car was probably fitted to them.
I presume the car John Murch was referring to was the 4½ litre Bentley up for sale by RM Auctions at Villa Erba yesterday. See the link below.
http://www.rmauctions.com/lots/lot.cfm?lot_id=1058593
Regards,
William
Yes, I have always assumed that they are there to stop muck etc. being thrown up into the engine area. Likewise they collect oil etc. from any small leaks from the engine which flies and dirt get stuck to. That may have been why I left them off!
Whether they were fitted to all cars I don't know but if you have holes on the outer edge of the sump flange and some small holes in the chassis your car was probably fitted to them.
I presume the car John Murch was referring to was the 4½ litre Bentley up for sale by RM Auctions at Villa Erba yesterday. See the link below.
http://www.rmauctions.com/lots/lot.cfm?lot_id=1058593
Regards,
William
-
Mark Hollis
- Posts: 162
- Joined: Mon Mar 01, 2010 6:23 pm
- Location: East Anglia
Engine trays
I reckon their most useful function is to catch tools etc when you drop them having just burnt your hand on the underside of the exhaust manifold!
I would prefer aluminium as (a) it looks smarter and (b) you hear the tool/whatever drop onto them even if they've slid out of sight under the ex manifold
Mark
I would prefer aluminium as (a) it looks smarter and (b) you hear the tool/whatever drop onto them even if they've slid out of sight under the ex manifold
Mark
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
On another forum is an interesting discussion on cooling and airflow.
I wonder if the reason that these “trays” are so rarely seen is that they restrict air flow somewhat and especially with an ageing radiator core, cause a tendency to overheat. Especially with a 3ltr which has a much smaller radiator than a 4.5.
With the result that they were removed.
I wonder if the reason that these “trays” are so rarely seen is that they restrict air flow somewhat and especially with an ageing radiator core, cause a tendency to overheat. Especially with a 3ltr which has a much smaller radiator than a 4.5.
With the result that they were removed.

