late turbo R has ignition but no crank or fuel pump prime
Posted: Fri Jul 11, 2025 7:05 pm
hello everyone, I wonder if you can help...
My late SZ turbo r SWB lost all power which we traced to a bad connection in the cut off/kill switch in the boot.
that restored ignition.
But still no crank...I then ran a starter button to get around this and then she ran.
However a few days later the button stopped working and now the fuel pump will not prime, so although I can still make it crank, it will not run due to the fuel pump not priming. I put a feed to the fuel pump relay which then did prime but it wont work after the initial prime. now it will not prime at all.
I previously replaced the CDL alarm batteries *under the second roll of the dash and the batteries have been replaced and all is well on that but I still have the non running issues as mentioned above.. I have checked the fuzees and relays and cant find any issue. Please can anytime advice? any help would be much appreciated!
My late SZ turbo r SWB lost all power which we traced to a bad connection in the cut off/kill switch in the boot.
that restored ignition.
But still no crank...I then ran a starter button to get around this and then she ran.
However a few days later the button stopped working and now the fuel pump will not prime, so although I can still make it crank, it will not run due to the fuel pump not priming. I put a feed to the fuel pump relay which then did prime but it wont work after the initial prime. now it will not prime at all.
I previously replaced the CDL alarm batteries *under the second roll of the dash and the batteries have been replaced and all is well on that but I still have the non running issues as mentioned above.. I have checked the fuzees and relays and cant find any issue. Please can anytime advice? any help would be much appreciated!