late turbo R has ignition but no crank or fuel pump prime

Forum for issues related to Crewe cars from The T Type to The Arnage & later Mulsanne
(Public visibility)
Post Reply
djgarfield
Posts: 22
Joined: Sun Feb 21, 2021 12:36 pm
Location: East Sussex, United Kingdom

late turbo R has ignition but no crank or fuel pump prime

Post by djgarfield »

hello everyone, I wonder if you can help...

My late SZ turbo r SWB lost all power which we traced to a bad connection in the cut off/kill switch in the boot.

that restored ignition.

But still no crank...I then ran a starter button to get around this and then she ran.

However a few days later the button stopped working and now the fuel pump will not prime, so although I can still make it crank, it will not run due to the fuel pump not priming. I put a feed to the fuel pump relay which then did prime but it wont work after the initial prime. now it will not prime at all.

I previously replaced the CDL alarm batteries *under the second roll of the dash and the batteries have been replaced and all is well on that but I still have the non running issues as mentioned above.. I have checked the fuzees and relays and cant find any issue. Please can anytime advice? any help would be much appreciated!
Post Reply