R-type centre gear change (picture)

Forum for Crewe Cars through S-Type & Derivatives
(Public visibility)
Post Reply
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

R-type centre gear change (picture)

Post by John Robins »

I know we have mentioned this before and there are some pictures posted somewhere, but I can't find them, so here are two views of the gearchange on B373TO, from above.

Image
Image
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Words fail me, (for a change!).

Certainly no factory conversion or factory authorized conversion, I hate it.

Chris
Laurie Fox

Post by Laurie Fox »

The earlier discussion is at www.bdcl.org/forum/viewtopic.php?t=644 plus pictures of the central gearchange from underneath. This was in the early days when I was starting to put pictures in topics (2004); there are over 1000 now!

Laurie
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

Post by John Robins »

The gearchange mechanism has always been like that, to my certain knowledge, since 1964. If it does nothing else, it can now claim to have reduced Christopher to speechlessness!
Last edited by John Robins on Mon Oct 17, 2011 7:40 pm, edited 1 time in total.
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

John.
It has been a beautiful day here, I have been in the workshop in a suds suit
turning 55/65 ton 3% chrome steel to make synchro cones, and then I am faced with a bit of bent steel welded onto a beautifully crafted gear lever.

I am sorry to dent your proud feelings, but the "thing" is best covered up!

Chris.
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

Post by John Robins »

I have no particular feelings for it or against it, but since I would have to find a new floor panel to return the car to a RH change, let alone sourcing all the other bits, and since I am used to the car the way it is, it will probably get covered up and as you suggest remain unseen.

As interest had been expressed, and as the floor had to come out, I took the pictures.

I am very pleased to hear that we still have some hands-on engineers left in this country. My experience of searching upon the internet for items, or for people with the capability of producing items, has so far caused me to fear a collapse into the opposite.
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

John,

My experience is that the opposite, generally is all sadly too true.

I only know one firm in the country that is totally reliable in making anything, Honley Bearings.

Chris.
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

Post by John Robins »

There's nothing to beat dragging up an old subject from the past, so I shall.

I visited Wroxton last Thursday, and Alan Bodfish copied the original build records for B373TO, and in spite of Mr C's protestations as seen above, the centre gear change was fitted by the factory when the car was built.

Perhaps Christopher is now speechless again!
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Very interesting, but still looks like a right old cobbled up variation on the original theme. I still hate it,and it compares very poorly alongside the left hand drive column change mechanism.
Post Reply