Mk VI - Removing the rear brake rods

Forum for Crewe Cars through S-Type & Derivatives
(Public visibility)
Post Reply
Al Coutts
Posts: 108
Joined: Sun Sep 25, 2016 11:00 pm
Location: Norfolk, United Kingdom

Mk VI - Removing the rear brake rods

Post by Al Coutts »

I'm struggling to undertsand how the rear brake actuating rods are attached at the backplate and how I dissassemble. I've got as far as removing the dust cap from the shoe expander.......

Thank you in anticipation javascript:emoticon(':)')
User avatar
Stephen Blakey
Posts: 1348
Joined: Thu Feb 02, 1995 12:00 am
Location: Derbyshire, United Kingdom

Post by Stephen Blakey »

Hi Al,

From memory, the rod comes out through the expander, temporarily, to allow the cone thing to be detached. The usual way to achieve this is to remove the expander and rod as an assembly (without applying any significant torque to the nuts as that will shear off the studs causing your wallet to wilt). You need to remove the milk-bottle-top end cap and two rivet type things that retain the pistons then it should come to bits with a certain amount of persuasion.

Sorry I haven't time for pictures or a more comprehensive explanation this morning.

Good luck,

Stephen
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Al,

1) Get a book.
2) Open it.
3) Read mark learn and inwardly digest.

Nut 8 is pinned.
Washer 7 is a Thackray washer and the nuts were never tightened to let the expander move.
If you have ruined 4 you may never get another one, except if you machine a 28 mm copper end cap.

6 is the retaining pine 2 off, with bifurcated ends.
12 is a rubber, calf castrating ring


Image

Image

The master cylinders are invariably knackered and need re-lining.

As one of your front early expanders is missing and new ones are £700, you may source the later double piston type, but be advised that the drawing G17 is actually a mirror image of the real thing.

Have fun:lol:
Al Coutts
Posts: 108
Joined: Sun Sep 25, 2016 11:00 pm
Location: Norfolk, United Kingdom

Post by Al Coutts »

Thank you both - mosty helpful. A :)
Geoff Simpson
Posts: 47
Joined: Sat Nov 19, 2016 12:51 pm
Location: Whitchurch, Shropshire & Javea Spain

More brake info

Post by Geoff Simpson »

Sure Chris has it covered but this could be of interest

http://www.kda132.com/pdfs/technical/br ... Brakes.pdf
Geoff Simpson
Posts: 47
Joined: Sat Nov 19, 2016 12:51 pm
Location: Whitchurch, Shropshire & Javea Spain

Rear Brakes

Post by Geoff Simpson »

Al Coutts
Posts: 108
Joined: Sun Sep 25, 2016 11:00 pm
Location: Norfolk, United Kingdom

Post by Al Coutts »

I've now a copy of the Service manual on my laptop and tomorrow when in the office will have a paper copy printed to leave on my workshop bench!

Thank you all. Geoff - see you on the 11th.


Al
Post Reply