engine breathing

Public visibility
Post Reply
Alan Wright
Posts: 3
Joined: Fri Feb 10, 2017 5:49 pm

engine breathing

Post by Alan Wright »

Hello,
can anyone advise on whats normal for engine breathing on big bore mk6,
my engine was breathing v very heavy from breather pipe, just had partial rebuild (bores , pistons , rings etc) first 50 miles no noticeable breathing at all,
after 100 miles very very faint breathing from pipe on tickover and with revs but sounds and drives so much better,would you say this is normal ?

Thanks
Alan.
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Yes.
You are always going to experience some blow-by from the pistons, as the piston ring seal is never 100%, it can't be or the engine would seize.

Some misguided people believe that blow-by gases are from "exhaust gas recirculation", and the fools have caused me some consternation in the past.
Alan Wright
Posts: 3
Joined: Fri Feb 10, 2017 5:49 pm

Post by Alan Wright »

Thank you for the reply
Post Reply