stuck clutch
-
Richardson Masten
- Posts: 49
- Joined: Thu Jan 01, 1970 12:00 am
- Location: California, USA
stuck clutch
Failed to lodge the clutch pedal down after reinstalling the engine in my 4 1/4. The clutch is stuck on. Using the engine to free it did not work. Squirted acetone on as much as we could see and it's been sitting for two days. Will try the engine and brakes to free, but what about a putty knife at the edge of the clutch between it and the flywheel, working all the way around it?
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Richardson Masten
- Posts: 49
- Joined: Thu Jan 01, 1970 12:00 am
- Location: California, USA
stuck clutch
Thanks John. We've tried that twice with no success yet. We'll be trying again in the morning and I'll advise.
-
Christopher Carnley
- Posts: 2753
- Joined: Fri Nov 16, 2007 12:00 am
- Location: Yorkshire, United Kingdom
-
Richardson Masten
- Posts: 49
- Joined: Thu Jan 01, 1970 12:00 am
- Location: California, USA
stuck clutch
While I can see that I should have posted this to the Derby site, I thank you for replying. WD40 with an extended pipe squirted into the Borg & Beck at open spots and waiting three days did the trick. Thanks again!
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
-
Richardson Masten
- Posts: 49
- Joined: Thu Jan 01, 1970 12:00 am
- Location: California, USA
-
Richardson Masten
- Posts: 49
- Joined: Thu Jan 01, 1970 12:00 am
- Location: California, USA
Re: stuck clutch
--- Sprayed WD40 with liberality and let it sit. Rocked the chassis whilst in gear and ran the engine against the brakes. The clutch finally became free and operates correctly. Thanks.Ric Masten wrote:Failed to lodge the clutch pedal down after reinstalling the engine in my 4 1/4. The clutch is stuck on. Using the engine to free it did not work. Squirted acetone on as much as we could see and it's been sitting for two days. Will try the engine and brakes to free, but what about a putty knife at the edge of the clutch between it and the flywheel, working all the way around it?

