Gearbox Additives

Forum for Crewe Cars through S-Type & Derivatives
(Public visibility)
Post Reply
Martin Webster
Posts: 192
Joined: Tue Feb 18, 2003 12:00 am
Location: Hampshire, United Kingdom

Gearbox Additives

Post by Martin Webster »

I am about to change the gearbox oil on B88HR. I intend using Comma EP 80W/90. Several years ago Chris Carnley recommended the addition of Slick 50 manual gearbox treatment when refilling with fresh oil. Do you still go with this decision Chris and do you think it would be beneficial?
Many thanks,
Martin
Christopher Carnley
Posts: 2753
Joined: Fri Nov 16, 2007 12:00 am
Location: Yorkshire, United Kingdom

Post by Christopher Carnley »

Hi Martin,

Comma 80/90 is OK, but if you are having selection difficulties not due to synchro damage, Slick 50 Transmission additive is beneficial, it is based on PTFE dry lubricant.
Add it before you pour in the fresh oil.
Make sure that the vent hole in the black cap of the dipstick is clear.
Martin Webster
Posts: 192
Joined: Tue Feb 18, 2003 12:00 am
Location: Hampshire, United Kingdom

Post by Martin Webster »

Thanks Chris, To be honest the changes are fine and crisp so unless the Slick gives any additional protection to the cones and gears perhaps it is unnecessary but in my case .
ATB Martin
Post Reply