Retrofit electronic analogue rev counter
-
Paul Bennett
- Posts: 91
- Joined: Wed Mar 05, 2014 10:17 am
Retrofit electronic analogue rev counter
B 143 WG
Positive Earth
I have often wondered what my engine ticks over at and have been looking around without success for an electronically driven rev counter / tachograph to position in my cubby hole. Also, at speed, my only idea of revs is that a standard 3.73:1 rear axle supposedly delivers circa 24 mph per 1,000 revs.
I wonder what the red line would have been for a new car, (not that I ever push it past 70 mph, which must be nearly 3,000 rpm?)
Size or make not critical, as it could be fitted at small or large end of aperture to suit. As long as it is black and white with a needle!
There are dozens available on line but I can't find one to suit a 6 cylinder positive earth car and I wouldn't think it possible to reverse its polarity?
I have only found 4 cylinder positive earth examples or same 2nd hand which may be from MGB's?
Any suggestions would be appreciated,
regards
Paul
Positive Earth
I have often wondered what my engine ticks over at and have been looking around without success for an electronically driven rev counter / tachograph to position in my cubby hole. Also, at speed, my only idea of revs is that a standard 3.73:1 rear axle supposedly delivers circa 24 mph per 1,000 revs.
I wonder what the red line would have been for a new car, (not that I ever push it past 70 mph, which must be nearly 3,000 rpm?)
Size or make not critical, as it could be fitted at small or large end of aperture to suit. As long as it is black and white with a needle!
There are dozens available on line but I can't find one to suit a 6 cylinder positive earth car and I wouldn't think it possible to reverse its polarity?
I have only found 4 cylinder positive earth examples or same 2nd hand which may be from MGB's?
Any suggestions would be appreciated,
regards
Paul
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
When I fitted one years ago on a special, I seem to recall that it had a black and a red wire to attach suitably to the power and a green(.?) wire which went to the distributor, so polarity wasn’t an issue. The one I had could be switched to deal with 4,6 or 8 cyl. motors. It may be that such units are no longer available.
Good luck!
Edited. I never got one to work with a magneto!
Good luck!
Edited. I never got one to work with a magneto!
- John Murch
- Posts: 1586
- Joined: Sat Jun 05, 1976 11:00 pm
- Location: London, United Kingdom
Had a look on ebay, would this sort of thing work?
https://www.ebay.co.uk/itm/12V-2-52mm-L ... SwNxda8pKc
https://www.ebay.co.uk/itm/12V-2-52mm-L ... SwNxda8pKc
-
Paul Bennett
- Posts: 91
- Joined: Wed Mar 05, 2014 10:17 am
-
Mark Taxis
- Posts: 226
- Joined: Mon Apr 02, 2007 2:57 pm
- Location: Queensland Australia
-
Paul Bennett
- Posts: 91
- Joined: Wed Mar 05, 2014 10:17 am
Looks like a Mk VI special, Mark; with a good instrument layout.
I had been looking at the Smith's rev counters, as I would have preferred an English-made one for a Bentley!
However, it was specifically advised on the dealer's website that they could not be used on positive earth.
Excuse my electronic ignorance, but what is a "loop inductor" and is there a Smith's model including it, (that I may have missed,) or is it something you have bought separately and specially installed? Is the "pick up" the wire that would go to the coil side of the distributor?
I mentioned what I had ordered to an auto electrician who thought that if I just transposed the red and black wires the instrument would try to go backwards!
(Or maybe he was joking?)
I just realised today that the distance from the cubby hole on the extreme right of dashboard is a long and difficult way to the distributor, and the coil is as far away as possible near the left of the radiator.
This is what happens when you get carried away buying something on the internet too late at night!
Thanks for your help.
I had been looking at the Smith's rev counters, as I would have preferred an English-made one for a Bentley!
However, it was specifically advised on the dealer's website that they could not be used on positive earth.
Excuse my electronic ignorance, but what is a "loop inductor" and is there a Smith's model including it, (that I may have missed,) or is it something you have bought separately and specially installed? Is the "pick up" the wire that would go to the coil side of the distributor?
I mentioned what I had ordered to an auto electrician who thought that if I just transposed the red and black wires the instrument would try to go backwards!
(Or maybe he was joking?)
I just realised today that the distance from the cubby hole on the extreme right of dashboard is a long and difficult way to the distributor, and the coil is as far away as possible near the left of the radiator.
This is what happens when you get carried away buying something on the internet too late at night!
Thanks for your help.
-
Mark Taxis
- Posts: 226
- Joined: Mon Apr 02, 2007 2:57 pm
- Location: Queensland Australia
Hi Paul
Yes, it is a Mk 6 special with a Harry Rose body, built by my father in the seventies.
This car was originally +ve earth, I converted it to – ve earth.
The Rev counter was a + ve unit, I adapted it to -ve earth this is the instructions that I followed. https://mgaguru.com/mgtech/electric/et202a.htm
Maybe that it is not possible to go the other way.
I have just had this gauge refurbished and it came back with a single pickup pulse wire, I think they hide the induction loop inside the casing.
There are Smith +ve earth gauges available here https://www.ebay.co.uk/sch/i.html?_nkw= ... noapp=true

Yes, it is a Mk 6 special with a Harry Rose body, built by my father in the seventies.
This car was originally +ve earth, I converted it to – ve earth.
The Rev counter was a + ve unit, I adapted it to -ve earth this is the instructions that I followed. https://mgaguru.com/mgtech/electric/et202a.htm
Maybe that it is not possible to go the other way.
I have just had this gauge refurbished and it came back with a single pickup pulse wire, I think they hide the induction loop inside the casing.
There are Smith +ve earth gauges available here https://www.ebay.co.uk/sch/i.html?_nkw= ... noapp=true

Mark Taxis
Sunshine Coast
Queensland 4560
Sunshine Coast
Queensland 4560
-
Paul Bennett
- Posts: 91
- Joined: Wed Mar 05, 2014 10:17 am
Thanks Mark.
I had looked at the + ve ones on e-bay first of all, but I think they are all for 4 cylinder MGB's, Lotus, etc. (unless anyone knows if they ever put a BMC 6 cylinder engine in a + ve earth version?)
I only remember that there was a later beefed-up version with the Rover V8 engine, (as also went in the Range Rover.)
I had looked at the + ve ones on e-bay first of all, but I think they are all for 4 cylinder MGB's, Lotus, etc. (unless anyone knows if they ever put a BMC 6 cylinder engine in a + ve earth version?)
I only remember that there was a later beefed-up version with the Rover V8 engine, (as also went in the Range Rover.)
-
Paul Bennett
- Posts: 91
- Joined: Wed Mar 05, 2014 10:17 am
Epilogue:
Oriental tachometer came yesterday; was jury-rigged but could not be made to give realistic readings.
Although lit up and read zero ignition on, read 2,000 rpm at tickover, (is maybe 500 in reality?)
Tested the 4/6/8 cylinder switch, (read 3,000 when experimentally switched to 8 cylinder.)
All neat multiples of pulses from the distributor!
Conclusion: not worth messing about with so gave it away.
Re. MGB positive earth tacho's, (my memory was prompted yesterday by a car auction entry,) they did make an MGC version in the late 60's with a 3 litre BMC 6 cylinder engine. If they were still positive earth cars maybe there is a source for their rev counters?
Oriental tachometer came yesterday; was jury-rigged but could not be made to give realistic readings.
Although lit up and read zero ignition on, read 2,000 rpm at tickover, (is maybe 500 in reality?)
Tested the 4/6/8 cylinder switch, (read 3,000 when experimentally switched to 8 cylinder.)
All neat multiples of pulses from the distributor!
Conclusion: not worth messing about with so gave it away.
Re. MGB positive earth tacho's, (my memory was prompted yesterday by a car auction entry,) they did make an MGC version in the late 60's with a 3 litre BMC 6 cylinder engine. If they were still positive earth cars maybe there is a source for their rev counters?
-
Christopher Carnley
- Posts: 2753
- Joined: Fri Nov 16, 2007 12:00 am
- Location: Yorkshire, United Kingdom
-
Mark Taxis
- Posts: 226
- Joined: Mon Apr 02, 2007 2:57 pm
- Location: Queensland Australia
Changing to -ve earth is very simple and opens up a new world, but the jag tacho might be worth looking at
https://www.ebay.co.uk/itm/Jaguar-MK-2- ... Sw8H1boAsl
https://www.ebay.co.uk/itm/Jaguar-MK-2- ... Sw8H1boAsl
Mark Taxis
Sunshine Coast
Queensland 4560
Sunshine Coast
Queensland 4560


