Car breakers

Public visibility
Post Reply
User avatar
John Murch
Posts: 1586
Joined: Sat Jun 05, 1976 11:00 pm
Location: London, United Kingdom

Car breakers

Post by John Murch »

I was surprised to see so many post 1965 Bentleys being broken for spares, some look to be in good order but doubtless have some terminal condition.
http://westminsterautospares.co.uk/http ... ation_id=7
DavidThompson
Posts: 139
Joined: Thu Sep 10, 2015 11:00 pm
Location: Hampshire, United Kingdom

Post by DavidThompson »

Indicative of how cheap these cars are, just not worth repairing when you can buy a runner for so little.
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

Post by John Robins »

Which vital component disappeared from Bentleys built after 1965?

The chassis.

Wonder if that has something to do with it, if your Mk6/R/S has terminal body shell troubles, you can at least recycle the chassis, thereby dodging the scrap man. The other equation is that of perceived repair cost versus actual. As said above, it is probably that, and seemingly a lack of support for the cars. There is mention of no key blanks elsewhere in these notes, which hardly inspires confidence considering what else might be without spares.
User avatar
John Murch
Posts: 1586
Joined: Sat Jun 05, 1976 11:00 pm
Location: London, United Kingdom

Post by John Murch »

I suspect electronics are the main culprit.
John Robins
Posts: 1208
Joined: Tue Jan 01, 1985 12:00 am
Location: Staffordshire, United Kingdom

Post by John Robins »

John Murch wrote:I suspect electronics are the main culprit.
Doesn’t this point back to support again, John? From what you can read in this forum, the electronics in such relatively recent cars ought to be either better supported or more reliable. Do Goodwood built Royces have the same troubles?
AskerBrowne
Posts: 125
Joined: Thu Mar 14, 2002 12:00 am
Location: Isle of Wight, United Kingdom
Contact:

Post by AskerBrowne »

The cost of rectifying the electrolytic corrosion between door handles and door panels (and the boot too) far outweighed the value of the car - a 1990 Mulsannes S Mk II.
Steering racks for an Arnage are £11000 to buy but only £5000 if you exchange old for new. Then there's the fitting. So many go for scrap because they are too costly to repair and beyond the ability of the private owner to DIY.
Will the GT range go the same way?
Post Reply