Page 1 of 1
Shock Damper Oil
Posted: Fri Jun 24, 2016 6:36 pm
by Martin Webster
Can anyone recommend a suitable brand and grade of shock damper oil. There are a number on the market but no viscosity is mentioned only light, medium and heavy.
B88HR
Posted: Sat Jun 25, 2016 8:52 am
by Christopher Carnley
As they are all getting a bit worn and leaky,I use 20/50 engine oil.
Posted: Sat Jun 25, 2016 12:41 pm
by Martin Webster
Thanks Chris, I thought of using fork oil which is too thin. 20/50 it is .
Posted: Sun Jun 26, 2016 5:35 pm
by Ewan Gallie
I’m using an ordinary 10W40 multigrade. I believe it’s better not to end up with a cocktail of different oils in order not to compromise the efficiency of the shock absorption. I presume, not being an engineer, that the tolerances on valves are machined for specific types of oil. My shocks are leaking and need topping up quite often, trying not to let any particle of dust in the filler spout. I think the onside rear one leaks the most because it gets quite warm being near the rear silencer. An overhaul is on the cards for the near future. On the other side, in the reservoir under the front floorboards, all seems to be working properly.
Ciao,
Ewan
Posted: Sun Jun 26, 2016 6:49 pm
by Christopher Carnley
"Multigame"? Tell us more!
Posted: Sun Jun 26, 2016 7:40 pm
by John Robins
Ipadese, I'll be bound.
Posted: Mon Jun 27, 2016 8:52 am
by Ewan Gallie
Christopher Carnley wrote:"Multigame"? Tell us more!
Sorry
corrected
Ciao