Andrew Lowden
Joined: 12 Jan 2009
Posts: 2
Location: Sale, Cheshire
|
 Posted: Sun Mar 06, 2016 1:12 pm Post subject: Continental R rear seat removal |
 |
|
| I have a 1991 Continental R and need to remove the rear seats. I have removed the nut in the centre at the front of the seat squab and can find nothing else holding it in place. How do I remove the seat squab? Is it simply a question of pulling until it comes out? |
|
Andrew Lowden
Joined: 12 Jan 2009
Posts: 2
Location: Sale, Cheshire
|
| Posted: Sun Mar 06, 2016 2:59 pm Post subject: |
|
|
| OK. Problem solved! Not the most intuitive of jobs but I got there in the end. Both squabs have to come out together and then you have to lift from the bar running across the back to lift the seat over the seat belt mounts. |
|
R Alan Cartwright
Joined: 15 Aug 2012
Posts: 17
Location: Hampshire, United Kingdom
|
| Posted: Sat Dec 31, 2016 4:26 pm Post subject: Rear Seats |
|
|
Thanks Andrew,
I needed to fix the housing of my rear seat belt sockets (identified as an advisory on the last MOT) and just could not find how to get the squab out to access them.
Albeit from March, your post has helped me a lot. Now fixed.
Shows the value of this BB.
Thanks,
Alan |
|
