Richardson Masten
Joined: 01 Jan 1970
Posts: 49
Location: California, USA
|
 Posted: Tue Jul 08, 2025 1:38 am Post subject: Driving dogs for my 4 1/4? |
 |
|
| Any thoughts as to where I can find replacement driving dogs for my 4 1/4? Mine are very "clonky." |
|
Christopher Carnley
Joined: 16 Nov 2007
Posts: 2746
Location: Yorkshire, United Kingdom
|
| Posted: Tue Jul 08, 2025 9:53 am Post subject: |
|
|
Try Fiennes Parts, or Steve Maggs at Maggs at Maggs Vintage.
I have had to renew worn hubs, and half shafts with new parts due to wear, the parts were never carburised in manufacture, or they would never have gone in.
I had a "bad" 3 1/2 litre from Mallorca 18 months ago, the axle was OK apart from the dogs, Steve sold me a plus 7 thou and a plus 10 thou, to de-clonk it.
This followed a 4 1/4 that had all of the 15 No crown wheel studs broken.
A bit of a mess. |
|
Richardson Masten
Joined: 01 Jan 1970
Posts: 49
Location: California, USA
|
| Posted: Thu Aug 07, 2025 5:27 am Post subject: |
|
|
| Relative to the driving dogs, today I have the rear end off the ground and I have noted that most of the clunking noise comes from the off side. Any thoughts or recommendations? |
|
